7 Best Dewalt Planers Reviews For Serious Woodworkers
It has an aluminum cast base, sturdy and strong for durability and also aligned for accuracy. It also uses disposable blades that eliminate the need for sharpening. With the DW734, you can only plane at a single speed of 96 CPI. It’s a really smooth finish as well, and I’m sure any woodworker can do well with it.
I haven’t had to try and have the knives resharpened. The sharpening services I have used don’t get blades as sharp as I would with sandpaper and glass. I’ve run 12 inches of stuff like purpleheart dewalt accessories through it and it does bog down and cause some tearout. But like emart said, that’s to be expected in a lunchbox planer. I have the same planer and still have the original box.
With the benchtop planer turned off, lower the cutterhead onto the board to get a starting point. Remove the board, turn on the machine, and run the board through the planer. Continue to lower the cutterhead for each pass until you’ve shaved the board down to the desired height. This planer has a 15-amp motor that produces 8,500 RPMs. It has a two-knife cutterhead and a depth of cut of up to 1/8-inch.
I would definitely recommend this planer to anyone serious about their wood. Portable thickness planers have to squeeze a lot of power into a small footprint that can be reasonably moved around a shop or to a job site. But even within this limitation there are some substantial differences in size and weight of the machines we’ve tested. But every machine is capable of planing boards 12 to 13 inches wide and 6 inches tall. The specifics and the differences are show in the lists below. The big chip on this planer blade was caused by a hidden nail embedded in a board.
In fact the last time we did a planer review was back in May 2011 when we did the Delta Planer. This time we are going to tackle the Dewalt 13″ two speed planer. We hope you enjoy this review as the next planer review will be in another two years. For woods that are harder or more prone dewalt accessories to tear out a slower speed might be useful. Personally I think preventing tear out has more to do with the sharpness of the knives and how deep each pass through the planer is. It can bog down if you’re trying to take too much good off a large board, especially with very hard wood.
The wood comes out so smooth it requires little to no sanding. I can move the planer easily and it takes up very little space. The first board I have ever done looks better than anything I have purchased at the big box wood suppliers. After running 3 projects worth of lumber through this planer, dewalt tools we’re impressed. The DeWalt DW735 is a perfect upgrade from the lower powered benchtop planer, and very effectively bridges the gap to professional shop machinery. We’re not quite ready to open a mill workshop, but this planer does everything that we’ve asked of it and has performed admirably.
The DeWalt 735 can also accept a helical cutter head instead of the standard 3-blade setup. While one of those cutter heads is half or more the cost of the entire planer, they are supposed to last for years, paying back their high cost over time. My recommendation is to buy or build a dedicated stand on workbench casters so you can move it around if you need to get it out of the way or change your angle of attack.
My DIYUniversity Course on woodworking for beginners is the best place online to learn a new skill and develop good working habits that will save you time and energy down the line. Learn what you need to know to setup your own off-grid energy source with these tried and tested plans. Welding isn’t just for the pros, you can learn along with Steve Maxwell everything you need for home workshop welding. All planers use many small bolts to secure blades, and losing just one means you won’t be able to use your planer until you get a replacement from the manufacturer. Avoid unnecessary hassles and frustrations by using a rare earth magnet to hold all knife bolts together in one clump after you take them out. This is the first and most important maintenance issue.
The extra set of planer knifes that comes with the DW735X are also extra helpful as you can quickly swap out the old knives when they get dull and replace them with the new knifes. While the DW735 is just the planer machine without the infeed and outfeed tables and the extra planer knifes. The only difference between the DW735X and the DW735 is that the DW735X comes with infield and outfeed tables for the planer, and an extra set of planer knives for the cutterhead. One thing that DeWalt has done with the DW735 is add a built in blower for clearing wood shavings from the blades. It has a surprising amount air flow, and if used without some type of dust collector, it will shoot wood shavings everywhere. It does a wonderful job at keeping dust and shavings from building up on the blades, thus lengthening their life.