Dewalt Lasers And Levels
It constantly monitors the laser’s temperature so the diodes are always driven to maximum line visibility, while protecting the laser diodes from overheating. This laser has a working range of 165 ft with a detector and a 65 ft visible working range. One switch is for a level line and the other is for the plumb line. The battery compartment is located on the lower rear of the unit. A simple, easy to pull down tab exposed a gasket protected battery compartment.
The forward projection does just what it sounds like, it projects a line directly onto the surface where the laser is pointed. Similarly, the 360 projection will project a line 360 degrees surrounding the laser. For example, when using a line laser in a room, the forward projection would provide you with a line on one wall whereas the 360 would project that line on all four walls of the room.
The DW088CG is a comparable but less expensive than both the Bosch and the Stabila. It also has an integrated bracket and full time pulse mode which allows the line to be picked up by a line-detector. The DW088CG Cross Line Laser emits a green beam and has a great range that projects bright crossing horizontal and vertical lines.
With such a wide offering, how do you know which one to choose for your job? In this article, we’ll dive into each type of laser and dewalt Hand tools for which applications each is most commonly used. We’ll also outline a few key products offered by DEWALT for each category.
The IP Code or International Protection Rating, consists of the letters IP followed by two digits. It classifies the degrees of protection provided against the intrusion of solid objects, dust, accidental contact, and water in electrical enclosures. If you’re aligning your artwork by the midpoint of each picture, you’ll need to measure the height of the artwork and divide by two to come up with its midpoint.