Regardless of whether a forward facing install uses the lower anchors or the vehicle seat belt, always attach the top tether to the tether connector on the vehicle. The 4Ever’s manual contains several references to the American Academy of Pediatrics recommendation that children under 2 should ride rear facing. In addition, NHSTA recommends that children 1-3 years continue to use a rear facing restraint as long as they fit by height and weight.
However, the Prias do not offer any kind of easy-installation system. However, like the Symphony seats, the Evenflo SafeMax shows no sign of any easy installation or harness adjustment systems. While this isn’t a bad seat, there’s no sign of an easy installation system or no-thread harness. You may use a vacuum graco booster seat cleaner to remove the dirt from the hard to reach places on a Graco 4Ever car seat. When not using the LATCH strap of the Graco 4Ever car seat, you may attach the LATCH connectors to the plastic bars found at the front of the car seat. Please refer to the following image taken from the Instruction Manual.
If the harness does not pass the pinch test at the shoulders, I pull the harness tight from behind the seat, then pull the harness tightening strap up front. It works great, and is very quick to get him in and snug. I’ve done this because graco travel system I find it difficult to see that the harness is at or below the shoulders and to do the pinch test at Petit Prince’s size. He seems happy and comfortable in the Graco 4Ever despite not being all that happy in car seats generally.
King Dad could still drive comfortably with the 4Ever behind the driver’s seat in position 1, but his seat wasn’t quite as far back is he normally likes it. When installed at recline 2, both King Dad and I can have the driver’s seat at our preferred positions without it touching the 4Ever. Though not as reclined as at position 1, I found recline position 2 to be comfortable for both Petit Prince and The Heir. When installed at recline 3, the 4Ever is as upright as it can be installed for rear facing.
Basically, you will hear an audible click when you have installed the car seat correctly, a feature I, as world’s most paranoid mom, appreciate. For me, personally, it took a few tries to hear a click that I trusted but, again, I am SuperCautious . Once I heard a confident click, I rested easy knowing my babe was safe.
Sometimes, depending on who’s in the car, we leave space in the middle of our backseat for toys, books, and the occasional adult passenger. It isn’t exactly easy for adults to climb into the car around the installed car seats, but because it isn’t a daily occurrence for our family, it rarely presents a challenge. This signal that the seat was secure gave us instant peace of mind. And when we needed to remove the car seat for cleaning, disconnecting it was just as simple—all we had to do was push down on the red button and pull out the LATCH tethers. High-back and backless are 2 standard types of booster seats. They do not come with a harness but are used with lap and shoulder seat belts in your vehicle, the same way an adult rides.
The frame of this car seat is steel reinforced and has extra padding on the sides that have been tested for side impact protection. The car seat comes with a newborn insert that protects baby when they’re super tiny but is removable for when baby grows out of it. This car seat also allows for rear facing up to 40 pounds or two years old. The seat can graco jogging stroller then reverse to front facing in order to keep growing with your family. For UAS installation when rear facing or when forward facing, the end of the UAS belt can be threaded inwards to make tightening it easier. For rear facing, there is an opening under the armrest where you can slide the UAS strap through without needing to remove the seat cover.
There’s no need to uninstall the seat to make this adjustment . The 4Ever has a no rethread harness, and the bar at the top of the headrest makes raising and lowering it super easy. It is incredibly smooth, and you don’t have to fight with it or even wiggle at all to get it to move. Make sure to loosen the harness completely before moving the headrest up or down. There are two available positions for the crotch buckle. The correct position of the buckle for your child is the one that is closest to his/her body without being underneath them.
We use Graco, Chicco and Britax car seats in our checks. Vehicles with the LATCH system have lower anchors located in the back seat, where the seat cushions meet. Tether anchors are located behind the seat, either on the panel behind the seat or on the back of the seat, ceiling, or floor (in most minivans, SUVs, hatchbacks, and pickup trucks). All forward-facing car safety seats have tethers or tether connectors that fasten to these anchors. Nearly all passenger vehicles and all car safety seats made on or after September 1, 2002, are equipped to use LATCH. See vehicle owner’s manual for highest weight of child allowed to use top tether.
There is no lockoff device for seat belt installations, so you’ll need to know how your seatbelts lock, particularly if you have an older vehicle. To be on the safe side, consult your vehicle owner’s manual to see if there are specific instructions for car seat installations. Generally speaking, all of the vehicles made after 1996 have seat belts that lock in some way and are able to hold a car seat firmly and in place during your driving.