There was only one time that we had to add some salt to our system. We had pretty heavy rainfall for a couple of days straight that raised the water level in our pool quite a bit. We either needed to drain it back down to where it was or add more salt to accommodate the extra water. We love that these pools use natural salt, so they are environmentally safe and don’t irritate the skin.
After testing and determining the free chlorine readings over a few days, adjust the output on the generator only. To fully clean your generator cell, mix 1 cup of vinegar with about 2 gallons of water. The next day, you will be able to remove almost all of the scale by spraying it with your water hose. An additional technique is to scrape or push the scale out from between the plates with a non-metal object.
If the provisions of this warranty cover the item, the item will be repaired or replaced at no charge. • Turn and pull valve handle to full upright position. • Unscrew two air release valve on the chamber to fullfill water. When the copper level is below 0.1 ppm, repeat step 6. If the packaging tells how much CYA is in the shock, you too can use PoolMath to determine how much you can use to get the desired CYA level for your pool.
Without it your chlorine will dissipate very quickly in the sunlight. The higher the UV, the faster it dissipates. Therefore, when you start it up this time make sure you add a dose of cyanuric acid to protect the chlorine. Also, concerning shocking this is also important in the salt pools to assist in oxidation of wastes. You should shock it every other week or more if it is being used often, heavy rain, canine pool party , etc. Similar to the usual freshwater Intex pools, Intex pools that are converted to use saltwater need regular maintenance to ensure that you have safe and clean water in your pool.
Discounts cannot be combined with other offers. Prices are subject to change without notice. During Black Friday, we expect retailers to limit the availability of the very best doorbuster deals. When these deals become available, they could run out quickly. Please check out if you are eligible for free shipping on the check out page. Intex has a limited two-year warranty from the date of purchase on the Krystal Clear Saltwater System.
Once you have attached the hose connectors correctly, you are ready to start the filter pump. The boost feature will run the chlorinator intex purespa for 8 times the amount of time the system has been set to run for. Once completed, the system reverts back to normal operating mode.