You should probably drain and refill the tub once a month, so figure the cost of about 200 gallons of water. The average price of water in the United States is about $1.50 for 1,000 gallons, making a gallon of intex purespa water cost less than one cent, and approximately $20 to fill the tub. You can leave the water in your tub anywhere from one to three months, depending on how often you use it and how many people are in it.
Use your test strips as your guide, and replace the water as needed. You’ll still probably want to replace the water every couple of months. Reconnect the pump to the tub and turn on deflation mode This will deflate the walls and base of the spa. For outdoor use, you should be very careful installing a spa on a wooden deck or porch. These places are generally not rated for significant weight loads, so be sure to check before you set up your spa.
I had the tub set up in less than an hour, another 2-hours to fill with water. This tub is very comfortable and the bubbles as good as any other tub that I have been in. I highly recommend this tub to anyone that is not sure if they really want to live the hot tub lifestyle.
This hot tub will not increase your electric bill as much as the Intex 28429E PureSpa Plus . Users say that the bill rises by $25 in summer and by $75 in winter. Does not have problems with heating the water — also known as the E90 error in these models, the hot tub should be able to heat the water without any issues. If the error appears without intex frame pool the filter installed and instantly after turning the hot tub on, it’s possible that the water pump motor failed and has to be replaced. Please contact the seller or manufacturer directly for more information or warranty replacement. The material of the tub is a highly durable fiber tech construction and it can withstand heavy-duty use.
Existing customers praise the easy set-up and operation of the hot tub from the control panel. They also commend its sturdiness and roominess, as well as the good depth. Users report the time taken for water to fully reach 104 fahrenheit as between 24 hours and three days, with cold climates on the higher end of the scale.
Contact the Intex service center for further direction. The laminate PVC is triple-layered and is puncture resistant. Insulating lid included, keeps the heat in and the cold out with the fitted lid that clips securely into place.
The suggested time for the Pure Spa to heat up to the maximum 40 degrees is hours. The water heats up around 2 degrees each hour which is more or less spot on with other brands. Many users say that 38 degrees is a comfortable temperature to sit in which will shave an hour or two off the heating time. The spa comes with a storage bag so it can be packed away neatly if it’s going to be unused for a period of time. As it’s so easy to unpack and set up, it’s not a huge chore to get back out again.