After you’ve shocked your pool and checked the chemistry, turn your filtration system on and allow it to run for at least 24 hours. The shock treatment will kill all the germs but you need your filter to remove them. After all, a lot of people swim in lakes and intex baby float other murky bodies of water. But unless you want a swamp thing going on in your backyard, you’ll want to stay on top of your maintenance. Most of the time, you can find fairly level ground to place it on. And keep in mind that it doesn’t have to be perfect.
Many consider having a private swimming pool to be an unattainable luxury, but I want to bring you over. Next use the little black rubber cap to plug the return from the inside of the pool and disconnect the hose and put it on the ground. Some water will drain out of the hose, but you shouldn’t lose too much. You won’t be losing any water from the hose and the little black cap inside the pool is preventing water from draining through the return. The next day it will turn on at the same time you started it and run for the set number of hours. When you order Intex equipment separately you may find your pool has the 1.25 inch hose connections and your new pump and filter have 1.5 inch hose connections.
Grab the large nut and screw it onto the new bulkhead. Depending on how well your helper is sealing the opening with their hand this intex baby float should stop most or all of the water from draining out. Install the new vent into the top of the bulkhead and the new valve.
These pool sets’ shapes range from round pools, rectangular pools, and also irregular-shaped ones. Next, disconnect the filtration system from the pool and remove any objects, such as ladders or pool toys from the water. Make sure to also store the pump and all its parts in a clean, dry place as well. Then drain the pool and allow it to dry out in the sun thoroughly.
Larger models will include a removable ladder as well. Place a pool cover over the swimming pool when not in use, especially if the pool is under large trees, to prevent leaves and other debris from accumulating in the pool water. Intex recommends only using an Intex brand pool cover designed for your specific pool size for best use and fit; a pool cover is included with most larger-sized Intex pools. Using a pool cover too small will not keep debris out of the water, and using one that’s too loose could cause the cover to blow away in strong winds.
All it takes is spreading it out on a level patch of grass, inflating it from the top ring, and attaching a garden hose to the drain plug to fill it. Using a heat pump to heat your pool will give you the lowest running cost. Remove the hoses that connect the pump and filter to the pool. You should always have standard safety equipment on hand in the immediate pool area.