Dewalt’s Benchtop Planer
Powerful 15 amp, 20,000 rpm motor of the woodworking planer handles larger, deeper cuts in hardwoods. I took a lot of time to search on various social media sites to determine what other users had to say about the DeWalt DW735X thickness planer. The company offers a 90-day money-back guarantee and one year of free service. The thickness planer is also covered by a three-year limited warranty. As mentioned throughout this DeWalt thickness planer review, the DW735X can handle boards that are up to 13-inches wide.
A thickness scale and a separate material removal gauge make it easy to set the 734 for the right depth of cut. When I slide a workpiece to the cutter-head carriage, I use the material removal gauge to set the carriage height for the desired cut. There is also an adjustment wheel marked in 1/64″ increments dewalt tools to move the carriage. The carriage itself has a lock bar that positively locks to the four columns and controls snipe, a deeper cut at the beginning and end of a board, a common planer problem. There is also a turret depth stop to set frequently used thicknesses for uniformity among projects.
If you still have questions about your benchtop planer, refer to your user’s manual or contact the manufacturer. Snipe refers to a line, sometimes very noticeable, left on the front or back of a workpiece where the planer has removed more material than throughout the field of the board. It’s an unsightly element that many benchtop planers leave on workpieces that pass through them.
Instead of one long straight blade, spiral cutterheads have multiple smaller knives, offset from each other in a spiral around the cutterhead. Spiral knife planers yield more consistent results than straight knife planers do. As well, the blades are reversible when they dull, and dewalt Hand tools if you run into a stray nail or screw with your planer, it will only damage one blade as opposed to the entire knife. Not surprisingly, spiral knife planers are often significantly more expensive than straight knife models. Fan powered chip ejection with dust collector hookup.
It gives the wood a nice, smooth finish and the thickness is accurate. It’s heavy enough that it doesn’t jump around or vibrate excessively. You will get snipe with it unless your board is well supported at both the infeed and outfeed of the machine. That being said, even without that good support the snipe will only be on the last inch or so of the board and can sometimes be sanded out.
The automatic carriage stop feature clearly solves this long standing design issue for planers. I can only hope that DEWALT continues offering this great product for many years to come. Material removal gauge and extra-large thickness scale deliver accurate cuts with every pass. 19-3/4″ cast aluminum base is 2X more rigid than a standard 10″ base and folding tables. Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine. If it were me, I would use the continuity part of your tester and go thru each switch/device, from power cord to motor and see where the problem is.