Dewalt Planer Trouble
As unlikely as it sounds, a thin film of wax on the support bed is essential for wood to pass smoothly through every planer I’ve used. This applies to the dozens of machines I’ve tested over the years, as well as the three different planers I’ve used personally in my own workshop. dewalt Hand tools Eventually, the wood stops feeding through properly without wax. Most woodworkers that I viewed online recommend upgrading the blades. There are many different replacement blade brands available, though I haven’t tried any so I can’t recommend one from personal experience.
It has an automatic locking carriage and two operating speeds. With the Rockler Protection Plan you’ll get accidental damage coverage immediately upon purchase of your tool. Plus we will extend the manufacturer’s warranty for your choice of an additional 1 or 2 years. We’ll take care of all parts and labor for any repairs with no deductibles and no hassles. If your tool can not be repaired we’ll gladly replace it. The CPO Sites are considered to be general audience Sites and are not to be used by children.
So, basically, if you have a means of supporting the lumber you plan to mill with the planer, then definitely go for the DW735. It is mandatory to procure user consent prior to running these cookies on your website. It’s worth nothing that you have to have the unit on when you’re changing speed in order for it to effectively change gears. A planer doesn’t need much juice to shave a layer off the top of these materials. BobVila.com and its partners may earn a commission if you purchase a product through one of our links.
It is a single-speed planer with a room for large planks of wood up to 6 inches in depth with a depth stop that allows you to return to your most frequent depth every time. Its infeed and outfeed are also extended to hold up to 33.5 -inch planks of wood comfortably. The infeed and outfeed are all fitted with rubber rollers between the blades which drive the lumber smoothly through the planer swiftly also reducing snipe. This DeWalt model is the most compact planer of the three main models weighing just 80lbs which makes it easier to mount and move around.
The power difference was clear during the planing operations as it didn’t seem to care what we ran through it. But it’s important to note if you’re going to buy the DEWALT DW735X you MUST have a dedicated 20A circuit as it’s not going to run dewalt tools well on a 15A circuit. We’re not going to rank this category as we feel a bench-top shop tool like this will always require some setup and fine tuning. Of the 8 planers Makita definitely has the best system for making those adjustments.
Hey Todd, is there anyone out there who has a good field set up for the 735X? Looking for an option that can be rolled out of a trailer and used on a stand reliably. Eric – There’s just no way for us to realistically do that. Many guys ask us about that, but we’re not a testing company, we don’t have the tools, resources or time to do long term testing.
This will enable you to save a lot of money on knife blades in the long run. It’s also very easy to change the knife blades due to a set of pins that have been machined on the cutter head along with matching holes that have been machined through the knife. Before I even ran a piece of wood through this dewalt Hand tools planer I was impressed. Out of the box the unit is very heavy and clearly a heavy duty machine. The DW735 is so easy to setup that even a complete novice to thickness planing can set it up in a mater of minutes. It comes with the blades already installed and all the pre-set stops factory adjusted.