Dewalt Planer Parts
To answer your question about my dust collector, I have a 1.5 HP JDS DustForce single stage dust collector and it handles the planer very well. It’s extremely important that the in-feed and out-feed tables are level in order to have consistent and representative tests. The as-shipped accuracy of the tables varied between the different models.We adjusted the in-feed and out-feed tables separately and then checked for level across the entire machine. The worst measured vertical deviation from flat at the edge of the outfeed table nearly 1/8” above the surface of the planer. All of the machines except the DEWALT DW735X needed minor adjustments to reach a level surface. Ultimately the surface finish is really important, especially if the finish reduces the time to prepare the work piece of paint, stain and or clear finishes.
Infinity Tools replacement knives for your DeWalt DW735 planer are the finest you can purchase. Since our knives are thicker than the original ones that came with the machine, our steel can lasts up to 4x longer – even in tough or abrasive materials. This type of steel’s extreme resistance to abrasion and wear make it the dewalt Hand tools ideal material for woodworking. So far, just put in a new set and used the machine now and then. My usage is lighter duty and infrequent, so that has worked. I’m very likely to replace the whole cutter head with a helical, carbide insert populated head if I get to using it enough to be frustrated by the current blades.
As a long time owner of this planer I agree with everything that you said about it. I do however feel that you overlooked it’s one real weakness, it’s blades. This results in ridges on the boards that need to be sanded. I have had much better results with aftermarket blades. One of the biggest complaints with smaller planers this size is snipe. I’ve planed well over 100 lineal feet of material and I have yet to find any snipe at all.
Each piece of wood was started at the first roller of the planer and we left our hands off the sample until it stopped past the outfeed roller. Next blue chalk powder was rubbed onto the last 6” of the board in order to make the snipe condition stand out visually. Most planers have two internal knives that revolve and cut wood. Regardless of the design, all planer knives bolt to a heavy, spinning component called the cutterhead. Most benchtop planer knives are not designed to be re-sharpened, and that’s a good thing because it makes them easy to deal with. Renewing blades is simply a matter of unbolting the old ones and either flipping them around or replacing them with new, then bolting everything together again.
After playing around with the planer shortly after assembling this setup I completely eliminated snipe. Then gradually snipe returned on the infeed side of the cuts. It wasn’t until I took pictures for this article that I realized why. To reduce snipe everyone recommends ramping up the infeed and outfeed sides of this planer.
This prevents problems such as snipe, which is quite frustrating for many wood workers. It’s a heavy-duty tool you can use to work with tough wood all day dewalt accessories long. If you’re looking for planers, DeWalt is always a great choice. Find out why you get your money’s worth with these premium-grade woodworking tools.