You just tuck the harness in the built in cubby, although the compartment is a bit small. These days, safety experts recommend keeping children facing backwards for longer, and the affordableGraco Extend2Fit has a 50-pound weight limit for the rear-facing position . Once you flip the seat to the forward-facing position, it’s safe to use all the way up to 65 pounds.
Graco recommends checking with the state you live in to make sure you’re following all regulations. There are no restrictions on which of the first three recline positions must be used in rear graco jogging stroller facing mode. The recline angle indicator on the side of the seat has a bubble that must be positioned along a blue line on the indicator, and that bubble must be entirely on the line.
“I can get my paw all the way through the appropriate areas. The harness adjustment feature alone is enough to give Graco repeat business,” she says. The Graco Extend2Fit was designed for parents who are mainly focused on getting through the early years with one car seat, and open to buying another one later.
All of their car seats and child restraints devices meet and exceed US Federal Motor Vehicle Safety Standard 213. The most significant benefit has got to be the InRight Latch system. It provides a quick and effortless one-second attachment with the audio click noise to make sure your car seat is installed correctly.
If you are able to leave the vehicle headrest in place, the Graco 4Ever’s headrest comes up straight. That means it is less likely to interfere with the vehicle’s headrest when it is installed forward facing. I checked that the seat was not moving more than 1″ in any direction at the belt path, and was able to get a secure install in all three forward facing recline positions using graco booster seat UAS. Next, I did a forward facing install in all three recline positions using the vehicle seat belt. I found it easiest to do a seat belt install by first snapping down the seat cover in the middle so I could gain easier access to the forward facing belt path. Remember to move the UAS strap down to the rear facing belt path and clip them on their storage point up front.