Dewalt Miter Saw Complaint
Tool Craze does not handle the sale of any item in any way. If you purchase something through a post on the Tool Craze site, Tool Craze may get a small share of the sale. A clone would mean it’s a rebranded model from the same factory but this is not.
It has 3 screw holes on each side to firmly secure the kerf plate to your saw. rnrnKerf plates are used to prevent excessive splintering, resulting in cleaner cuts. Using the wrong kerf plate for your tool can dewalt tools give a rough edge to the material you’re cutting. At the time of this article writing, there are 2,589 ratings, and if 89% of those ratings are five-stars, then that means nearly 2,305 ratings were five-stars.
Suppose you want to carry it from one place to another. This consists of a sheet of plastic that can be mounted on the top of the blade to shield it from debris while you’re not using it. This way, even though you don’t use the saw for a while, the blade remains sharp. This particular model is popular 12” blade running at 15 amps with a speed of 3600 RPM motor that delivers enhanced durability and power. It has received wonderful reviews from consumers for its power, sturdiness, miter angles, dimensional capacities and adjustability.
No adjustments were needed for the miter or bevel factory settings which was a nice surprise. After six months of use we continue to be impressed with the saws accuracy and precision even though we use it for both rough framing and finish work. We’ve used the saw cutting exterior trim, decking, interior oak stair treads, and interior trim with great success. Again, I’d compare this saw to any of the DEWALT saws we’ve been using on the job for years. This is perhaps the smallest in the miter saw series but delivers real power and toughness when it comes to its utility. It weighs about 43 pounds and armed with a carbide blade and a blade wrench.
I have both fixed and sliding with double bevel but my Dewalt planner is so good I would think this unit would also be a great buy. The depth-of-cut feature works well for an auxiliary bed and fence. I often cut small moldings with my miter saw but find that the factory fence doesn’t give enough support for tiny pieces. The depth-of-cut adjustment keeps the blade from cutting all the way through the plywood bed so I can focus on the cut and not worry about ruining the fixture. This lever can be pulled down so you can keep the blade from cutting through your workpiece. You can adjust the depth precisely by moving the depth-of-cut set screw in or out.
The lock lever needs just a downward push to lock the blade to any angle of miter cut. The table also stops at convenient detents for common cuts and for cutting crown molding flat against the table. If you need infinite variability, a bypass lever gets you free of detents and allows you to quickly move to any degree. With the double bevel saws, the saw blade will be able to tilt to the left and the right, which means that you’ll be able to make bevel cuts at any angle. This makes it a lot easier when you’re working with finishing carpentry, fine woodworking, or other projects that require angle cuts and corners.
Most customers find it difficult to unlock the Dewalt miter saw. It may also contribute to certain obstacles in buying since the consumer should be aware of the product. It is essential to understand how the miter saw locks and unlocks to operate the saw safely.
They’re all made of aluminum, so their weight shouldn’t be an issue. But even with that, there’s a 38-pound discrepancy between the lightest and heaviest table. The lightest table is DWX723, which weighs around 29 dewalt Hand tools pounds. Another thing that will help you make your decision is how easily the stand can move. Of course, all three stands can be folded up and carried, but what about moving them on the floor within your shop?
The Dewalt is the best option due to its capacity and is budget-friendly. It comes with a stainless steel plate, which is easy to adjust. The longevity and quality of a table saw are expected to stand out.