Dewalt Lasers
The point laser marks a single specific point on any flat surface. For mounting projects that require the precise placement of nails or screws, such as a kitchen remodel, the single point offers an exact reference. Many laser levels can emit two or three beams simultaneously, allowing you to see both horizontal and vertical guidelines, as well as a cross-point for those lines.
A laser like this is ideal for various leveling and layout applications, such as, drop ceilings, cabinets, remodeling and tile work. If you frequently work on professional projects, you can save a lot of headache with a commercial-grade tool. The DEWALT DW089LG is one of the top-of-the-line choices for a commercial-grade level. For the price, you will get three dewalt tools separate 360-degree line lasers that are capable of filling an entire room with three line guides. The laser light is green, which can be up to four times brighter than the typical red lights midrange and budget options produce. Use this tool to layout suspended ceiling grids, walls and partitions, and to level cabinets, shelving, floors and soffits.
A good laser level should give you options when trying to keep a surface straight. Different projections and features can make the job easier when you have a high degree of flexibility to use. The Tavool Self-Leveling Laser Level takes the top spot because of the flexibility it offers when your project requires straight lines on flat surfaces.
The Stabila LAX300 G is specifically designed for interior construction projects. Stabila uses a technology they call STABILA GREENBEAM. This technology provides for a razor-sharp, extremely bright, laser line. The laser also gives you clear lines from the floor to the ceiling, provides two plum-line dots, and has a laser range is rated 90 feet. The word “laser” is an acronym for Light Amplification by the Stimulated Emission of Radiation. While the science is a bit complicated, basically, that means that lasers emit radiation in the form of visible light.
The Makita left, is visible to about three feet past the dot. I’m not sure if that is a limitation of the laser or the detector. At the time of this writing, Makita does not offer a five spot/cross line laser. And, aside from DeWalt, the only other true five spot/cross line I know of is sold by Spectra. Other brands, Makita included, offer “five point” combo lasers with the fifth point being the forward cross hair, not an actual spot.
They can also be used outdoors when framing or installing a deck. It is resistant to water and debris, thanks to the over-molded housing and IP65. Kit includes Blow Mold Case, Extended Ceiling Bracket, 12-Volt Battery, Charger and Green 3 x 360° Line Laser. Indoors, the lines of dewalt accessories both laser levels are visible to at least 100′ forward. The left/right 180° fan of the forward lines however, are barely visible past ten feet on either laser. This is good enough for hallways but for large rooms you need to spin the laser toward the wall you’re working on.
al and horizontal lines for an accurate measurement in most layouts. The locking pendulum casing offers ample protection to the internal parts while the over-molded design resists shocks. You can use this instrument with a tripod thanks to the integrated 1/4″ thread. Included is the laser itself along with an AA Starter pack, extended ceiling bracket, target card and enhancement glasses. It’s green beam provides enhanced visibility and extended range.
After you dig 3 inches down and place the grade rod in the hole, you should hear a beep and read that the laser is hitting the detector. This is verification that you have dug the 3 inches deep. Let’s begin with the most common laser found on a jobsite, the line laser. A line laser projects an accurate horizontal or vertical illuminated line onto the surface at which the laser is pointed. Use line lasers indoors when installing cabinetry, tile, a drop ceiling, or for basic leveling.
This means you can accurately and easily tackle projects that require the utmost in precision, such as laying tile, installing cabinets, or framing a home addition. Grade rods are used in conjunction with rotary lasers for digging or leveling earth. You must move the detector up or down on the grade rod while the rotary is spinning until you identify the laser line. When that laser line is found you have then established “grade” or level. If you are looking to dig a hole that is 3 inches deep, for example, you would move the detector 3 inches up the grade rod.
Spot lasers differ from line lasers in that they project a small circle of light onto the surface your laser is focused on. They are intended for transferring points from one surface to another. This could be for making sure a joist or wall is plumb or to ensure pipes traveling from floor to floor are plumb. Spot lasers are most commonly used for plumbing installation, electrical work, HVAC, and framing applications.