Dewalt Dcf801b 12v Max Brushless Impact Driver
Both tools are reasonably compact in size, making them perfect for situations where fasteners are difficult to reach or you don’t have a lot of room to maneuver. The included impact driver provides up to 1,700 inch-pounds of torque and two speed settings. The set includes two 20-volt batteries, as well as a charger and handy carrying bag. Since drills and impact drivers can go hand-in-hand on most projects, it makes sense to keep both around in a well-equipped tool box. Recognizing this, many manufacturers offer great combo kits that come with both a drill and impact driver.
If you already have a Ryobi 18-volt battery, then all you need is this powerful tool that tackles most fastening tasks with ease. When you’re deciding between dewalt toolss, you can choose between 12- or 20-volt models. A quick look tells you that the 12V tool runs at a little under 1,000 in-lbs., the 20V Max reaches at least 1,400 in-lbs., and the Max XR can top 1,800 in-lbs. This means the 12V model is a handy tool for occasional home use, and the others are what a serious DIY enthusiast or pro would choose. While we don’t come across many tools that have a terrible grip, some are better than others. We look at how the tool fits in your hand along with how comfortable and secure the rubber overmold is.
The best impact driver does not need to be the most expensive or complicated. In fact, many top-tier options come with a no-frills approach since the driver and a battery is really all you need. Another difference between power drills and impact drivers is that the latter doesn’t have a chuck; instead, impact drivers have quick-release shanks that fit all ¼-inch hex driver bits. This power tool has a swappable attachment system that fits on the same base, meaning you can turn one tool into many different tools.
Obviously, the faster the rpm, the quicker you’ll get the job done, but keep in mind that going too fast can strip screws or damage the wood. You’ll also find that as torque increases, speed decreases. Note that this number is usually the tool’s “no load” capacity, meaning the maximum it can deliver when running in the air, not actually driving a screw. Impact drivers are all about torque, which is dewalt tools a measurement—usually stated in inch-pounds—of the tool’s turning power. As a general rule, the more battery power, the more torque, which is why 18- or 20-volt tools handle harder wood much more easily than a 12-volt impact driver. Although it’s not at the professional level, for a tool aimed at the DIY/handyman market, it’s hard to beat the power and performance of the Ryobi ONE+ Impact Driver.
Product arrived sealed in bag with manual and belt hook. The sticker on the bag included NBX in the part number which I assume to mean no box. Plugged a battery in and drove in a few screws, everything working as expected. Maintaining speed under load is more important than the no-load speed given on the back of the box. We drive ledger screws into glued-up laters of OSB and measure the maximum RPM with all of the threads engaged in the final inch of driving. Better drills have higher RPMs while under this moderate load.
After hand-threading each nut down onto the welded bolt, we use the impact driver to give it three 3-second and 5-second bursts. We then measure the torque required to remove the nut and apply a formula to the results. The DeWalt DCF809 impact driver functions like a value-geared Pro-level impact driver. A straight-up 12V replacement wouldn’t have quite the same feel. It clearly sits in the middle of the 18V/20V Max pack with respect to power, but with a size more on par with the feature-rich DCF887.
Using a right-angled head, rather than the typical straight-angled design, this impact driver allows you to get past obstacles and into cramped areas more readily than standard options. Other than the right-angle bend in the head, however, the power tool is a typical impact driver capable of delivering up to 600 inch-pounds of torque for secure fastening. For anyone starting from scratch with a new impact driver, the Makita XDT131 Kit will give you everything you need to handle most fasteners. The 18-volt impact driver delivers up to 1,500 inch-pounds of torque, has two speed settings, and comes with one of Makita’s interchangeable batteries and charging stations.